SpaceX’s 31st flight of the year will launch another batch of Starlink satellites as part of the Starlink Group 4-22 mission onboard a Falcon 9 rocket. Liftoff is scheduled for Sunday, July 17 at 10:20 AM EDT (14:20 UTC) from Space Launch Complex 40 (SLC-40) at the Cape Canaveral Space Force Station in Florida.
Sunday’s launch will see another Falcon 9 booster reaching 13 flights, the highest number of flights currently in their fleet. Booster B1051 first flew supporting the Demo-1 mission back on March 2, 2019, and last flew on the Starlink Group 4-12 mission back on March 19, 2022.
This launch will also involve the 1,000th satellite launched to the fourth shell of SpaceX’s Starlink constellation, approaching two-thirds of its completion.
The weather forecast released by Space Launch Delta 45 predicted only a 50% chance of favorable conditions for launch on Sunday. The main concerns are the violation of the thick cloud layer rule, cumulus cloud rule, and anvil cloud rules. These are related to the potential for the rocket to trigger lightning as it ascends through the lower parts of the atmosphere.
The forecast improves greatly for a backup launch opportunity on Monday with an 80% chance of favorable conditions – the only concern being a violation of the cumulus cloud rule. The weather forecast shows a low risk of other factors like upper-level wind shear, solar activity, or booster recovery weather to be an impediment for launch on either primary or backup launch opportunities.
Falcon 9 will begin its usual automated fueling sequence at the T-35-minute mark as the vehicle begins to load RP-1 (a highly refined form of kerosene) on both stages and liquid oxygen (LOX) on the first stage.
- Starlink 4-22 Updates
- SpaceX Missions Section
- L2 SpaceX Section
- Click here to Join L2
RP-1 load on the second stage will finish about 15 minutes later which will be followed by the now-famous “T-20 minute vent.” This vent is part of the purging procedures of the strongback ahead of LOX load on the second stage at the T-16 minute mark.
Seven minutes before liftoff, the chilling sequence on the nine first stage main engines will begin and a minute later RP-1 load on the first stage will be completed. Strongback retraction should follow four minutes before launch, and at around T-three and two minutes, the LOX load sequence will finish on the first and second stages, respectively.
One minute before launch, the rocket’s onboard computers will take control of the automated launch countdown sequence. The computers will command ignition of the nine Merlin 1D engines on the first stage at the T-3 second mark and these will ramp up to full power over the next 2.8 seconds. At T-0, the four hold-down clamps on the launch mount will release the rocket.
The Falcon 9’s flight profile will involve a two-minute and 28-second powered flight using the nine first-stage engines. After this, they will shut down and the first and second stages will separate.
After separation, the Merlin 1D Vacuum (MVacD) engine on the second stage will ignite for the six-minute ride to the 232-by-338 kilometer 53.22-degree inclination target orbit.
Meanwhile, the first stage will maneuver engines first and execute its traditional entry and landing burns. Landing is scheduled to occur on SpaceX’s Autonomous Spaceport Drone Ship Just Read The Instructions, which will be located about 650 km downrange in the Atlantic Ocean.
The fairing halves will separate from the second stage about 10 seconds after the first MVacD ignition. These are planned to come down to a parachute-assisted splashdown in the Atlantic Ocean and be recovered by SpaceX’s multi-purpose recovery vessel Bob.
After orbital insertion, the second stage will initiate an end-over-end rotation maneuver to start the Starlink deployment sequence. The satellites will separate about 15 minutes into the flight, after which they will deploy their solar panels and raise their orbits for checkouts and screening. If the satellites pass the checks, they will be allowed to raise their orbits to operational altitude.
The second stage will execute a second and final burn of the MVacD engine after satellite separation to deorbit. It will burn up over the Indian Ocean.
The Starlink constellation will gain another 53 satellites after Sunday’s launch. A total of 2,805 satellites have been launched – of which 254 have reentered already. Of the 2,551 satellites currently in orbit, 44 of them have failed in orbit or are unresponsive and 2,052 are in operational orbits.
|Shell #1||Shell #2||Shell #3||Shell #4||Shell #5|
|Orbit||550km circular at 53º||570km circular at 70º||560km circular at 97.6º||540km circular at 53.2º||560km circular at 97.6º|
|# of orbital planes||72||36||6||72||4|
|Satellites per plane (target)||22||20||58||22||43|
|Total satellites (target)||1,584||720||348||1,584||172|
|Satellites in operational orbit||1,464||19||0||569||0|
(Status of Starlink constellation information from Jonathan McDowell as of July 14th)
Sunday’s launch will mark SpaceX’s fourth launch of the month and the 31st of the year, matching their record for most launches in a given year – which was set in 2021.
The company has at least two more launches scheduled for the rest of the month – both Starlink missions. The first will be Starlink Group 3-2 next Thursday from Vandenberg, while the second – Starlink Group 4-25 – is currently scheduled to lift off from Launch Complex 39A no earlier than July 24.
(Lead image: Falcon 9 B1051 on SLC-40 ahead of the Starlink v1.0 L27 mission in May 2021. Credit: Stephen Marr for NSF)
The post Fourth shell of Starlink constellation to reach 1,000 satellites appeared first on newsastronomy.com.